Molybdenum plate is a metal plate mainly made of molybdenum, with a silver gray metallic luster on the appearance of the product.
Molybdenum is very hard and soft, with greater toughness than tungsten. Molybdenum has a high elastic modulus, while tungsten and tantalum only have high melting points. Molybdenum plates are used in many special steels. Other common uses include molybdenum electrodes, vacuum furnace applications, nuclear energy, missile and aircraft components.
The thickness ranges from 00.090 inches to 3 inches and is classified as molybdenum plate. Molybdenum plates are widely used in mold and component furnace construction, as well as component manufacturing in the electronics and semiconductor industries.
Organic silicon molybdenum plate was reviewed using silicon source Si2Cl6 and silicification conditions, as well as some of its properties. The plate is first deposited with molybdenum silicide, such as 4 MoSi2, initially 6 meters thick (10 minutes later), and then merged for storage, forming a uniform layer of MoSi2 molybdenum silicide plate after 30 minutes. The weight of the organic silicon plate dissolved by the anode increased exponentially with 0.2 M sulfuric acid, reducing the thickness of the MoSi2 layer. The corrosion of seawater and sea sand, as well as the wear of organic silicon molybdenum plates, increase the electrical resistivity, thereby increasing the silicification temperature and Si2Cl6 flow rate..
Specifications
BCM=9.9 (0.3-10) (60-400) above 800
content
Molybdenum content 99.95%~99.6% Impurity content ≤ 0.04%
density
Molybdenum density in molybdenum plate is 10.2 grams per cubic centimeter
performance
Corrosion resistance
workmanship
Squeezing, forging, rolling
purpose
Mold and component furnace construction, component manufacturing in the electronics and semiconductor industries